AQUASTOP SEWERAGE is a liquid sealant designed to seal leakages in free-flow sewage pipes and drains made of plastic and cast iron. When exposed to air, the sealant crystallizes in the leakage points and forms a durable elastic seal.
Flush out a damaged section of the sewer pipe to remove deposits. Use an end cap or an inflatable plug at the lowest point to plug the leaking pipe section. Check the plug tightness with water.
- Thoroughly mix the contents of the canister until the product is homogenous.
- Fill the damaged pipe section with the sealant diluted with water at a ratio of 1:5. The pipe must be filled completely. Leave the sealant in the pipe for 1-3 days depending on the conditions. Add more sealant to the pipeline if necessary.
- After sealing, drain the sealant and flush out the pipe with water.
- Attention! Standard chemical safety precautions must be observed. In case of contact with eyes or skin, rinse with plenty of running water.
- Keep away from children!
Ingredients: Alkaline silicates, cellulose fibers, and special proprietary additives.
Keep away from cold