AQUASTOP POOL is a liquid sealant designed to seal leakages in swimming pools. It efficient against any leakages in pool basins and pipes.
AQUASTOP POOL sealant forms a durable elastic seal around the leakage point.
User Manual.
Before using AQUASTOP-POOL sealant, switch the filter to bypass mode. Set the sand filter to recirculation mode. Other types of filters: remove cartridges from the filter unit. Then continue circulation with an empty filter unit.
Add the sealant to the pool basin at a ratio of 1 to 1000 (one liter of sealant to one ton of water). Ensure the water in the pool basin is mixed at least once every 4-6 hours. Drain the pool basin 48 hours after applying the sealant. It is not recommended to exceed the sealant concentration by more than two times.
Attention!
- Thoroughly mix the contents of the canister until the product is homogenous.
- Add the sealant to the pool basin at a ratio of 1 to 1000 (one liter of the sealant to one ton of water). Make sure the water in the pool basin is mixed at least once every 4-6 hours. Drain the pool basin 48 hours after applying the sealant. It is not recommended to exceed the sealant concentration by more than twice.
- Attention! Standard chemical safety precautions must be observed. In case of contact with eyes or skin, rinse with plenty of running water.
- Keep away from children!
Ingredients: Alkaline silicates, cellulose fibers, and special proprietary additives.
Keep away from cold